FEATURES
●Strength European standard integrated frame, 304stainless steel desktop with aesthetic design.
● All-in-one functions such as casting, trimming, rollingand winding etc.
● The power rollers are independently driven by servomotor, the roller speed is controlled accurately, and the synchronizationperformance is good.
● The height of the casting roll can be adjusted up anddown to meet the process requirement of casting forming of materials withdifferent solution strength.
● Hard chrome mirror roll with 304 stainless steel rollcore, high surface finish and no rust.
● High-quality and intelligent PLC touch screen, easy tooperate.
● Built-in circulating water cooling, precise control ofcasting roll temperature.
● Optional air knife or electrostatic adsorber to improvethe adsorption of the solution and the roll surface.
● Optional waste collection device for wasterecycling.
Model | FDCI-20/28 |
Co extruded layer | 2 |
NO. of Extruder | 2 sets |
NO. of screw | Single screw |
Screw diameter | 20 mm |
Length diameter ratio L / D | 28 |
Co-extrusion mode | A/B/A or A/B |
Die width | 200 mm |
Maximum screw speed | 120 rpm |
Maximum operating temperature | 350℃ |
Temp Accuracy | ±1℃ |
Control | SIEMENS PLC |
Working voltage | Three-phase 380VAC±10%, single-phase 220VAC±10%,50Hz |
L×W×H | 1700mm×1050mm×1970mm |
Weight | Approx.1600kg |
Note: The parameters are subject to change without prior notice.
Leave a message
NAME*
Mobile phone number*
E-mail*
Consultation Overview*
![Wechat Scan QR code](javascript:Site.hoverQrCode("//17222374.s21i.faiusr.com/2/8/ABUIABACGAAgwqOBigYo8LKe2gYw8AE47gE.jpg",this,{"tips":"Scan QRcode"});){kind=link}